Vertical Disc Centrifuge
Model HH-219 Solid Bowl Separator
Specification Data Sheet
|
|
|
Application
Purification of mineral oils (fuel, lubricating, turbine, hydraulic, run-in oils and workshop oils, etc.) used in marine installations and engineering industries.
Standard Equipment
Purifier parts, set of gravity disks, supply device with sight glass for priming and wash water, outlet sight glass, revolution counter, standard set of spares, electric motor. |
TECHNICAL DATA SHEET
MODEL HH-219
|
|
CAPACITIES
MAXIMUM RATED CAPACITY
MINIMUM / MAXIMUM TEMPERATURES
Distillate
Viscosity 1.5 - 5.5 cSt/40°C (104°F)
|
2,200 L/H
30°F / 212°F
1,950 L/H
|
|
Steam Turbine
Maximum density of oil 991 kg/m3 at 15°C
Sludge Holding Space
Drive Motor (Direct Drive)
Gear Case Oil
Operating Water for Sealing
Max chloride content of 60 PPM
|
__0
1,400 L/H
1.2 litres
1.5 KW
.70 litre
200-400 kpa
|
|
|
SPEED
The maximum speed of the spindle must not be exceeded.
|
|
Drive motor
Bowl Spindle
Run up time
Run down time
|
1750 RPM
7500 RPM
Approx. 2-3 minutes
Approx. 1-5 minutes
|
|
Materials
Frame: cast iron (epoxy enamel)
Covers: cast aluminium
Bowl Components
Bowl body, hood, disc stack: stainless steel
Distributor, top disc: bronze
Special materials
Specific materials can be used in bowl components and must be specified at time of order.
Unit is shipped with all necessary bowl insertion tools,
mounting isolators, built-on feed pump and motor.
Shipping Data
Centrifuge with tools, motor, built-on feed pump 240kg
|
|
|