Vertical Disc Centrifuge

Model HH-219 Solid Bowl Separator Specification Data Sheet click for print-friendly page

PDF: ExxonMobil DTE Oil Light MSDS

Application Purification of mineral oils (fuel, lubricating, turbine, hydraulic, run-in oils and workshop oils, etc.) used in marine installations and engineering industries. Standard Equipment Purifier parts, set of gravity disks, supply device with sight glass for priming and wash water, outlet sight glass, revolution counter, standard set of spares, electric motor.

TECHNICAL DATA SHEET MODEL HH-219

CAPACITIES MAXIMUM RATED CAPACITY MINIMUM / MAXIMUM TEMPERATURES Distillate Viscosity 1.5 - 5.5 cSt/40°C (104°F)   2,200 L/H   30°F / 212°F   1,950 L/H Steam Turbine Maximum density of oil 991 kg/m3 at 15°C Sludge Holding Space Drive Motor (Direct Drive) Gear Case Oil Operating Water for Sealing Max chloride content of 60 PPM __0 1,400 L/H   1.2 litres   1.5 KW   .70 litre   200-400 kpa

SPEED The maximum speed of the spindle must not be exceeded. Drive motor Bowl Spindle Run up time Run down time   1750 RPM   7500 RPM   Approx. 2-3 minutes   Approx. 1-5 minutes Materials Frame: cast iron (epoxy enamel) Covers: cast aluminium Bowl Components Bowl body, hood, disc stack: stainless steel Distributor, top disc: bronze Special materials Specific materials can be used in bowl components and must be specified at time of order. Unit is shipped with all necessary bowl insertion tools, mounting isolators, built-on feed pump and motor. Shipping Data Centrifuge with tools, motor, built-on feed pump   240kg