Vertical Disc Centrifuge
|
Application
Purification, concentration, clarification of mineral oils (fuel, lubricating, turbine, hydraulic, and workshop oils, etc.) used in marine installations and industries.
Standard Equipment
Tools, set of gravity disks, supply device with sight glass for priming and wash water, outlet sight glass, revolution counter, standard set of spares, electric motor.
|
TECHNICAL DATA SHEET
MODEL HHPX-205
|
|
CAPACITIES
MAXIMUM RATED CAPACITY
MINIMUM / MAXIMUM TEMPERATURES
Distillate
Viscosity 1.5 - 5.5 cSt/40°C (104°F)
|
4,900 L/H
30°F / 212°F
4,400 L/H
|
|
Steam Turbine
Maximum density of oil 991 kg/m3 at 15°C
Sludge Holding Space
Drive Motor (Direct Drive)
Gear Case Oil
Control Panels
Motor Starter (VFD) Optional
Operating Water for Sealing
Max chloride content of 60 PPM
Water usage per discharge
|
__0
3,200 L/H
1.3 litres
4 KW
4.0 litres
110/220 v
240/480 v
200-600 kpa
6.0 litres
|
|
|
SPEED
The maximum speed of the spindle must not be exceeded.
|
|
Drive motor
Bowl Spindle
Run up time
Run down time
|
1750 RPM
7605 RPM
Approx. 2 minutes
Approx. 4 minutes
|
|
Materials
Frame lower/upper, hood: cast iron
Inlet/outlet parts: tinned steel/silumin, brass
Bowl Components
Bowl body, hood, discs, bowl bottom, gravity disc, upper pairing chamber, operating slide: stainless steel
Special materials
Specific materials can be used in bowl components and must be specified at time of order.
Unit is shipped with all necessary bowl insertion tools,
mounting isolators, built-on feed pump and motor.
Shipping Data
Centrifuge with tools, motor, built-on feed pump 550kg
|
|
|
